Chunky edge white frame - Large (Print not included)

  • £150.00
    Unit price per 
Tax included. Shipping calculated at checkout.


Your print will be framed in a white wooden chunky frame with glass 

(uk orders) or Perspex (International orders), white mount and a backboard.

Large Frames are sized to fit your print with an 2cm border of mount board, these frames are intended to frame the Pure Evil Nightmare Series prints, but can be custom made to fit any print of a similar size. 

Frame dimensions (standard size nightmare series print) 83 x 97.5 x 4.5cm 

Please let us know in the notes which print we will be framing or simply order your frame and print together.

Artwork NOT included, this is for the frame and framing service only.

If the print you are framing is a Pure Evil print from the Nightmare series we will paint the signature tear drop continuing down over the mount and the frame, we will also provide you with a colour matched drip and blob kit to continue the effect down your wall at home.

There are 2 metal D Ring hangers attached to the back. We don't like using string to hang our framed prints, as one day, in the future, that string will snap and you will be sad, we learnt that lesson the hard way! We recommend resting the metal hangers directly on to screws securely fixed into your wall.

 

Please allow at least 2 weeks for framing orders to be completed. If you need your framed piece faster or for a specific date, please email us and we will see what we can do.

If you would like 70% UV protection, non-reflective Artglass this will be an additional £100. Please email us your request for Artglass when you buy the frame and we’ll get back to you, we usually have it in stock.

Email us HERE

 

Occasionally people buy a frame and get just the frame sent to them because they already have a print, this is how to frame your print (this print is in a tube)

Okay, the first step is to flatten the Print, so you need to put it underneath some books probably for 4 to 5 days.

Then the staples on the back of the frame should bend, or come out, so the Backboard and the board come out. Leave the glass in.
Then put the print down on the backboard and the mount board and make some little loops of masking tape, which go between the print and the mountboard. Make sure that it is centred, it should be about 2 1/2 cm on either side top bottom left right.
Then check the glass see if there’s any bits of fluff, blow those out.
The Print stuck to the mountboard goes back in, and then the Backboard goes in, and then the staples go back in. Make sure when putting it in that you dont accidentally fold the print putting it in.